TTL Serial JPEG VGA Camera with NTSC Video for Arduino
- Product ID: 1103
- MPN: ADA397
This camera module can be a pretty neat project addition. It was designed to be used in security systems and does two main things - it outputs NTSC video and can take snapshots of that video (in color) and transmit them over the TTL serial link. You can snap pictures at 640x480, 320x240 or 160x120 and they're pre-compressed JPEG images which makes them nice and small and easy to store on an SD card. Perfect for a data-logging, security, or photography project.
One nice thing about this particular camera is all the 'extras' that come with it. For example it has manually adjustable focus, auto-white-balance, auto-brightness and auto-contrast taken care of for you as well as motion detection built in! That means you can have it alert your project when something moved in the frame.Using the module is pretty easy and only requires two digital pins (or a TTL serial port) - by default it transmits at 38400 baud. Of course we wouldn't just leave you with a datasheet and a 'good luck', we even spent a lot of time researching the module and DSP to make a really nice Arduino library with example code that shows how to change the image size and compression quality, detect motion, control the video output stream, etc.
|Communication||3.3V TTL （Three wire TX, RX, GND） on 2.0mm pitch connector|
|Operating voltage||DC +5V|
|Baud rate||Default 38400, Maximum 115200|
|Image sizes||VGA（640*480), QVGA（320*240), QQVGA（160*120）|
|Monitoring distance||10 meters, maximum 15meters (adjustable)|
|Viewing angle||60 degrees|
|Frame speed||640*480 30fps|
|Image sensor||CMOS 1/4 inch|
|Output format||Standard JPEG|
|Max analog gain||16DB|
|Dimensions||32mm x 32mm|