Small Reduction Stepper Motor - 5VDC 32-Step 1/16 Gearing

  • Product ID: 1046
  • MPN: ADA858
M.R.P: ₹570.70
₹439.00 In Stock
₹518.02 (Incl. GST)
You Save: ₹131.70 (23%)




Bulk Discounts
Qty Price
1-5 ₹439.00
6-9 ₹425.83
10-49 ₹417.05
50+ ₹395.10


This is a great first stepper motor, good for small projects and experimenting with steppers. This uni-polar motor has a built in mounting plate with two mounting holes. There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set. (Actually its 1/16.032 but for most purposes 1/16 is a good enough approximation) What this means is that there are really 32*16.032 steps per revolution = 513 steps! The shaft is flattened so its easy to attach stuff to it with a set-screw. A perfect first stepper motor and works well with the Motor Shield for Arduino.

The gearing has a few side effects which are important to note. First, you can turn the stepper by hand but not as smoothly as an un-geared stepper. It also means you shouldn't use interleaved or micro-stepping to control or it will take forever to turn. Instead use single or double stepping. The torque is fairly high but its slower than un-geared steppers - we maxed out at about 50 RPM by over-driving it a bit with 9VDC. At 5V try to stick to under 25 RPM.


Shaft Diameter 5 mm flatened
Dc impedance 42 Ω per winding
Step per revolution 513
Holding Torque 15 N*mm
Weight 37 g
Gear Reduction 1 /16.025