Mikroe mikromedia Plus for PIC32MX7

  • Product ID: 8281
  • MPN: MIKROE-1399
M.R.P: ₹23,528.70
₹18,099.00 Backordered
₹21,356.82 (Incl. GST)
You Save: ₹5,429.70 (23%)
Estimated delivery between Aug 27 - Sep 2
Free Shipping

Quality
First

Awesome
Support

Secure
Checkout
Bulk Discounts
Qty Price
1-5 ₹18,099.00
6-9 ₹17,556.03
10-49 ₹17,194.05
50+ ₹16,289.10
Qty

Description

Main features

PIC32™MX7 on-board.

chip.png

Mighty PIC32MX795F512L microcontroller with 512KB of Flash, 128KB of RAM and loads of on-chip modules is ready to handle your ideas.

Large 4.3" Touch Screen

scale.png

It’s time to see the big picture. New 4.3” touch screen driven by SSD1963 graphics controller delivers crystal sharp image in 480x272px resolution.

Communicate wirelessly.

wifi.png

Nordic’s nRF240L01+ transceiver with active chip antenna will make you forget about wires. Drive it with simple SPI commands. It that easy.

A whole lot of modules

puzzl.png

Board has it all: USB connector, temperature sensor, PIN photosensor, IR receiver, accelerometer, battery charger, MP3 codec, buzzer, etc.

What’s on Board

Click on the desired thumbnail to view full image. ( All images shown are for illustration purpose only. Actual board may vary due to product enhancement ).

cercle_rouge.png
port_expander.png

Port Expander

Board features MCP23S17, a 16-bit I/O expander with SPI clock speeds up to 10 MHz which provides two additional GPIO PORTS.

on_off_switch.png

ON/OFF Switch

Two position ON/OFF switch is a handy feature. It’s conveniently located right on the edge of the board.

audio_jack.png

Audio connector

Quadrupole audio connector enable you to connect headphones with microphone to the audio codec chip and use it in your applications.

mp3_codec.png

Stereo Audio codec

VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files.

tft_connector.png

4.3” Touch Screen

480x272 Color TFT Display with Touch Panel can display vivid and clear color images or advanced graphic content.

tft_new.png

Touch Screen Connector

Connector for the Touchscreen flat cable is located at the back of the board.

solomon.png

SSD1963

Popular Solomon graphics controller SSD1963 handles the TFT display. It has built-in 1215K bytes frame buffer, Dynamic Backlight Control and many other cool features.

piezo_buzzer.png

Piezo Buzzer

With piezo buzzer you can debug your applications, or have audio signalization feature. It can be connected to two digital output pins, one of which is the output of PWM module.

mikroprog.png

Piezo Buzzer

With piezo buzzer you can debug your applications, or have audio signalization feature. It can be connected to two digital output pins, one of which is the output of PWM module.

accelerometer.png

RGB LED

Front side features RGB LED which is useful for simple visual signalization.

rgb_led.png

RTCC Crystal Oscillator

Board contains 32.768kHz Crystal oscillator (X1) which provides external clock for internal RTCC module.

mcu.png

PIC32MX795F512L

High-performance PIC32MX7® microcontoller with 512KB of Flash, 128KB of RAM and loads of on-chip easily handles demanding applications.

usb.png

miniUSB connector

Microcontroler supports Full Speed and USB 2.0 OTG, so this connector allows you to communicate with a PC or other USB devices using USB connection.

ethernet_phy.png

miniUSB connector

Microcontroler supports Full Speed and USB 2.0 OTG, so this connector allows you to communicate with a PC or other USB devices using USB connection.

microsd_slot.png

microSD card slot

microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.

serial_flash.png

Serial Flash Memory

Store up to 8 Mbit of data in M25P80 Serial Flash Memory with 25 MHz SPI Bus Interface. It suports over 100,000 Erase/Program Cycles per Sector and has over 20 Year Data Retention.

rf_antenna.png

Active RF chip antenna

Active RF chip antenna for 2.4 GHz RF transceiver.

nordic_rf.png

RF Transceiver

Nordic nRF24L01+ is a wireless ultra low power 2.4 GHz RF transceiver. It has a simple UART interface.

battery_charger.png

Battery Charger

MCP73832 Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.

power_screw.png

Power Terminals

You can easily provide necessary power supply using these power supply screw terminals.

battery_connector.png

Battery Connector

Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.

ir_reciever.png

Infrared Receiver

IR receiver diode enables you to remotely control your device.

photodiode.png

Photosensor

PIN photosensor enables you to measure ambient light and respond by dimming or brightening up the screen backlight.

frontal_reset.png

Reset Button

High quality reset button with surrounding reset circuitry ensures stable reset operation.

connection_pads.png

Connection pads

Every unused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.

ethernet_leds.png

Ethernet Indicators LED

Two LEDs (Link and Ackowledge) are provided for monitoring ethernet communication.

temp_sensor.png

Stereo Audio codec

VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files.

pwr_led.png

Power LED

We have added power indicator LED, so you can be sure whether your board has stable power supply.

battery_led.png

Battery Indicator LED

Whenever your board charges the battery, this LED will glow in red. When it’s fully charged it will change to green. Handy, isn’t it?

mounting_holes.png

Mounting Holes

Four mounting holes, one in each corner of the board, facilitate board integration.

Why choose mikromedia

Programming

programming.png

The onboard microcontroller is preprogrammed with fast USB HID bootloader, so it’s ready to work right out of the box. You don’t have to spend a dollar more on programmers. If you need a powerful debugger use mikroProg for PIC, dsPIC and PIC32.

Compilers

3d-printing-software.png

mikromedia Plus for PIC32MX7 is fully supported by mikroC, mikroBasic, mikrobasic and mikroPascal compilers for PIC32. Compilers come with dozens of examples that demonstrate every feature of the board.

GUI design with Visual TFT

analytics.png

Easily create fantastic colorful graphical user interfaces (GUI) for mikromedia in VisualTFT software. Even total beginners will be able to create amazing mikromedia applications.

why_choose_mikromedia.png

Modules

Click on the desired thumbnail to view full image. ( All images shown are for illustration purpose only. Actual board may vary due to product enhancement ).

Graphics Controller

mikromedia-plus-for-PIC32MX7-mcu_small.p

Popular Solomon graphics controller SSD1963 handles the TFT display. It has built-in 1215K bytes frame buffer, Dynamic Backlight Control and many other cool features.

4 Audio connector and codec

mikromedia-plus-for-PIC32MX7-audio_small

VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files, 3.5mm four pole audio jack allows you to directly connect your headset to mirkomedia and develop various audio applications.

microSD card slot

mikromedia-plus-for-PIC32MX7-sd-card_sma

microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SDIO communication.

Wireless connectivity

mikromedia-plus-for-PIC32MX7-wifi-antenn

Mikromedia plus for STM32 is equipped with the Rufa 2.4GHz antenna, from antenova®. It allows easy development of applications that use wireless communication.

miniUSB connector

mikromedia-plus-for-PIC32MX7-usb_small.p

Microcontroler supports Full Speed and USB 2.0 OTG, so this connector allows you to communicate with a PC or other USB devices using USB connection.

Battery connector

mikromedia-plus-for-PIC32MX7-battery_sma

Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.

What’s in the Package

All images shown are for illustration purpose only. Actual board may vary due to product enhancement.