Arduino Nano USB Microcontroller v3 (No Headers)

  • Product ID: 9015
  • MPN: RB-Gra-04
₹3,589.00 Backordered
₹4,235.02 (Incl. GST)
Estimated delivery between Dec 19 - Dec 25
Free Shipping






The Arduino Nano USB Microcontroller v3 (No Headers) is a breadboard ready version of the Arduino Mini 05 Microcontroller Module with integrated USB. The Nano has everything that the Arduino Duemilanove USB Microcontroller Module has (electronically) with more analog input pins and an onboard +5V AREF jumper. The Nano automatically senses and switches to the higher power supply, so there is no need for a power select jumper.

The nano's pin layout works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The Arduino Nano USB Microcontroller v3 (No Headers) can be powered via the mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. The package contains only the microcontroller.

  • Automatic reset during program download
  • Power OK blue LED on the bottom
  • Green (TX), red (RX) and orange (L) LED
  • +5V to AREF jumper
  • Auto sensing/switching power input
  • Small mini-B USB for programming and serial monitor (cable not included)
  • ICSP header for direct program download
  • Power OK blue LED on the bottom
  • Standard 0.1" spacing DIP (breadboard friendly)
  • Manual reset switch

  • PDF Files

  • User manual
  • ATmega168 datasheet
  • Arduino Nano 3.0 Schematic
  • Arduino Nano 3.0 User Manual
  • ATmega328 datasheet
  • Specifications

    Clock Speed 16 MHz
    SRAM 2 KB
    Flash Memory 32 KB (of which 2KB used by bootloader)
    DC Current per I/O Pin 40 mA
    Analog Input Pins 8
    Digital I/O Pins 14 (of which 6 provide PWM output)
    Input Voltage (limits) 6-20 V
    Input Voltage (recommended) 7-12 V
    Operating Voltage (logic level) 5 V
    Microcontroller Atmel ATmega328
    Dimensions 0.70" x 1.70"