Overview
Introducing the highly anticipated Raspberry Pi 5! lineup featuring a 64-bit quad-core Arm Cortex-A76 processor running at 2.4GHz. This iteration delivers a 2 to 3 times increase in CPU performance compared to its predecessor, Raspberry Pi 4. With its 800MHz VideoCore VII GPU, the Raspberry Pi 5 gurantees an improvment in graphics performance, supporting dual 4Kp60 display outputs over HDMI and advanced camera functionalities through a rearchitected Image Signal Processor.
Designed for both consumers seeking a seamless desktop experience and industrial users exploring new applications, the Raspberry Pi 5 marks a full-size evolution with in-house built silicon, the RP1, enhancing I/O capabilities and peripheral performance significantly.
Features
Some of the primary changes and features of Raspberry P 5i.
1. 64-bit Quad-Core Arm Cortex-A76 Processor
2. RP-1 Chip
Specifications
Processor | Quad Arm Cortex-A76 @ 2.4GHz Cryptographic Extension support (AES on hardware) 512KB per-core L2 caches 2MB L3 cache |
RAM | 4GB or 8GB LPDDR4X-4267 SDRAM |
Display | Dual 4kp60 HDMI display output with HDR support |
Video | 4kp60 HEVC decoder VideoCore VII graphics, with OpenGL-ES 3.1, Vulkan 1.2 Raspberry Pi Image Sensor Processor (ISP) |
Connectivity | PCIe (1× 2.0 port, additional HAT required) 802.11ac dual-band WiFi Bluetooth 5.0 (with BLE support) Gigabit Ethernet |
USB | 2× USB 3.0 (Simultaneous full throughput) 2× USB 2.0 |
CSI/DSI | Dual 4-lane MIPI CSI/DSI transceivers 2× Display 2x Camera 1x Display & 1x Camera (Any one of the above combinations) |
GPIO Header | Raspberry Pi 40-pin GPIO header |
Other Features |
Fan Connector UART Connector RTC (Real Time Clock) RTC Battery Connector Power Button |
Dimension | 85 x 56 mm |
Power Supply
We recommend using a official Raspberry Pi 5 27W USB-C power supply which provides 5A current at +5.1V output.
The power supply comes with a USB-PD protocol which enables the control of higher voltages and currents through software, but necessitates the presence of a specific Power Management Integrated Circuit (PMIC). This component is exclusively found in the Raspberry Pi 5. To utilize these power supplies effectively, it is essential to use USB-PD compatible cables thus the official Raspberry Pi 5 power supply comes with a cable attached.
Attention! Using other USB-PD-capable phone chargers, despite advertising power outputs greater than 15W, typically attain this by elevating the voltage rather than supplying a higher current at +5V. Should you use a power supply incapable of delivering 5A at +5V upon initial boot, the operating system will issue a warning, indicating that the current available for peripherals is limited to 600mA.
Mechanical Drawing
Pinout
3V3 Power | 1 | 2 | 5V Power |
GPIO 2 (SDA) | 3 | 4 | 5V Power |
GPIO 3 (SCL) | 5 | 6 | Ground |
GPIO 4 | 7 | 8 | GPIO 14 (TXD) |
Ground | 9 | 10 | GPIO 15 (RXD) |
GPIO 17 | 11 | 12 | GPIO 18 (PCM_CLK) |
GPIO 27 | 13 | 14 | Ground |
GPIO 22 | 15 | 16 | GPIO 23 |
3V3 Power | 17 | 18 | GPIO 24 |
GPIO 10 (MOSI) | 19 | 20 | Ground |
GPIO 9 (MISO) | 21 | 22 | GPIO 25 |
GPIO 11 (SCLK) | 23 | 24 | GPIO 8 (CE0) |
Ground | 25 | 26 | GPIO 7 (CE1) |
GPIO 0 (ID_SD) | 27 | 28 | GPIO 1 (ID_SC) |
GPIO 5 | 29 | 30 | Ground |
GPIO 6 | 31 | 32 | GPIO 12 (PWM0) |
GPIO 13 (PWM1) | 33 | 34 | Ground |
GPIO 19 (PCM_FS) | 35 | 36 | GPIO 16 |
GPIO 26 | 37 | 38 | GPIO 20 (PCM_DIN) |
Ground | 39 | 40 | GPIO 21 (PCM_DOUT) |
Opps
Sorry, it looks like some products are not available in selected quantity.