SKU: TH2005
Sold Out!
We will notify you when this item is back in stock. Please enter your email.
USB to 5.5mm DC Booster Cable - 9V or 12V Output is a simple way to run compatible higher-voltage DC devices from a standard 5V USB source. Plug it into a computer USB port, USB battery pack, or other 5V supply, and the integrated boost converter raises the voltage for devices that need 9V or 12V DC input.
A built-in selector switch lets you choose between 9V and 12V output, while the onboard display shows the selected voltage so you can verify the setting before powering your equipment. This is useful for test benches, portable setups, and small electronics that use a barrel-type DC input.
The cable comes fitted with a DC plug and includes a 3.5mm / 1.35mm adapter for added compatibility. Please check your device voltage requirement, plug size, polarity, and current draw before use to help avoid damage.
Technical details for this USB booster cable.
| Input | 5V |
|---|---|
| Output | 9V @ 1A / 12V @ 750mA |
| Power | 10W |
| Plugs | 5.5mm / 2.5mm & 3.5mm / 1.35mm |
| Cable Length | ~72.2cm / 2.5 ft |
| Weight | 28g |
Everything included with the cable.
You can draw about 1A when set to 9V, or about 750mA when set to 12V. For reliable operation, use a 5V USB source that can supply enough input current for the connected load.
This cable is intended for compatible DC-powered devices only. It is not a universal charger, so always confirm connector fit and electrical requirements before connecting sensitive equipment.
It takes a 5V USB input and boosts it to a selectable 9V or 12V DC output for powering compatible devices. A built-in switch lets you choose the output voltage, and the display shows the selected setting.
The cable is designed to run from a 5V USB source such as a computer USB port or a USB battery pack. Make sure the USB source can supply enough power for your connected device.
According to the supplier specs, it can provide about 1A at 9V or about 750mA at 12V. The rated power is 10W.
The listed plug sizes are 5.5mm / 2.5mm and 3.5mm / 1.35mm. The product includes the USB booster cable and a 3.5mm / 1.35mm adapter for broader device compatibility.
The cable length is approximately 72.2cm, or about 2.5 feet. This makes it suitable for short, tidy power runs from a nearby USB source.
It is intended for devices that accept the supported DC plug sizes and operate within the cable's output limits of 9V at 1A or 12V at 750mA. Check your device's required voltage, current, and connector size before use.
Average rating
Based on 0 reviews
No reviews match this filter yet.
