USB WiFi (802.11b/g/n) Module with Antenna for Raspberry Pi

Product ID: 1470
Usb wifi 802 dot 11b slash g slash n module with anten 905376907
  • Usb wifi 802 dot 11b slash g slash n module with anten 905376907
  • Usb wifi 802 dot 11b slash g slash n module with anten 687733323
  • Usb wifi 802 dot 11b slash g slash n module with anten 797100459
  • Usb wifi 802 dot 11b slash g slash n module with anten 528099761
  • Usb wifi 802 dot 11b slash g slash n module with anten 447716901
$28.99 Out of Stock

Out of Stock

No worries, we can notify you when this item is back in stock. Please enter your email.

You will be notified about this product only!

Make your Internet of Things device cable-free by adding super WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find ones that work well with the Pi and Bone without the need of recompiling any kernels: its supported by the Bone's Angstrom installation that comes with each Bone as well as the Adafruit Occidentalis distribution. You'll have wireless Internet in 10 minutes! Works great with 802.11b/g/n networks.

When you don't need the small size of our Miniature or Stick-size WiFi adapter, this guy has a massive antenna for greater range! Please note we have changed to an adapter that does not have a removable antenna

If using with a Beagle Bone: Because of the high power required by WiFi, a 5V 2A power adapter is required to power both the Bone and WiFi. Flaky behavior and crashes may result if this is not followed! We have a tutorial for using this module with the Beagle Bone!

If using with a Raspberry Pi: The latest Wheezy distributions support this module out-of-the-box. Also, the Adafruit Occidentalis distribution has support built in. Check out our detailed tutorial for how to set up WiFi networking on the Pi You may find that you need to have a powered hub to use this adapter, so if you're having power flakiness with your Pi, try a hub!

USB WiFi (802.11b/g/n) Module with Antenna for Raspberry Pi (0:05)

Specification

Storage Humidity5% ~ 95% (Non Condensing)
CompliancesRoHS Compliant, Wi-Fi Compliant
RF Output Power13 ~17 dBm (Typical)
ModulationBPSK, QPSK, 16QAM, 64QAM with OFDM, 11g: BPSK, QPSK, 16QAM, 64QAM, OFDM, 11b: DQPSK, DBPSK, DSSS, CCK
Data Security64/128-bit WEP Encryption WPA, WPA-PSK, WPA2, WPA2-PSK. TKIP/AES
NetworkAuto-switch to use 802.11n or 802.11g or 802.11b mode Supports Ad-Hoc, Infrastructure WLAN network, Wireless roaming, Data rate auto fall-back under noisy environment or longer range distance, Site Survey with Profile function
Configuration & ManagementPlug-and-Play setup and installation, Management Utility supports 2000 / XP/ Vista
Media Access Control CSMA/CA with ACK
Operating Temperature 0°C to 40°C
Operating Humidity10% ~ 90% (Non Condensing)
Storage Temperature-20°C to 75°C
Antenna Length 150mm
Weight6g
Wireless StandardsIEEE 802.11n (draft), IEEE 802.11g, IEEE 802.11b
Host InterfaceHigh speed USB2.0/1.1 interface
Data Rate802.11n: up to 150Mbps (downlink) and up to 150Mbps (uplink) , 802.11g: 54 / 48 / 36 / 24 / 18/ 12 / 9 / 6 Mbps auto fallback, 802.11b: 11 / 5.5 / 2 / 1 Mbps auto fallback
Frequency Band2.4GHz ISM (Industrial Scientific Medical) Band
ChipsetRealtek RTL8192cu Chipset
RF Frequency412 ~ 2462 MHz (North America), 2412 ~ 2472 MHz (Europe), 2412 ~ 2484 MHz (Japan)
Radio Channel 1 ~ 14 channels (Universal Domain Selection)
Antenna TypeIntegrated Antenna
Roaming Full mobility and seamless roaming from cell to cell