Teensy 3.2 + header

Product ID: 1050
Teensy 3 dot 2
  • Teensy 3 dot 2
  • Teensy 3 dot 2 2
  • Teensy 3 dot 2 3
$32.99 Out of Stock

Out of Stock

No worries, we can notify you when this item is back in stock. Please enter your email.

You will be notified about this product only!

Teensy 3.2 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.2 brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming directly in C language. Teensy 3.2 is an upgraded version over 3.1! Teensy 3.2 is a drop-in replacement upgrade for 3.1 and can run any sketches designed for 3.1.

This latest version of this complete USB-based microcontoller development system now adds a more powerful 3.3V regulator, as well as accepts a wider voltage input range. This board has the same size, shape and pinout as well as full compatibility with all shields and add-on boards made for the Teensy 3.1, plus double the Flash memory as the Teensy 3.0.

Please note: Teensy 3 and 2 are not official Arduino-brand products. Although the Teensyduino IDE has been adapted so that many simple Arduino projects will work with the Teensy, there will still be a lot of libraries and shields that will not work with this device! If you're new to microcontrollers, we suggest going with a classic Arduino UNO since all Arduino projects, examples and libraries will work with it.

Technical Specifications:

  • 32 bit ARM Cortex-M4 72MHz CPU (M4 = DSP extensions)
  • 256K Flash Memory, 64K RAM, 2K EEPROM
  • 21* High Resolution Analog Inputs (13 bits usable, 16 bit hardware
  • 34* Digital I/O Pins (21 shared with analog)
  • 12 PWM outputs
  • A 12-bit DAC output
  • 8 Timers for intervals/delays, separate from PWM
  • USB with dedicated DMA memory transfers
  • CAN bus
  • 3 UARTs (serial ports)
  • SPI, I2C, I2S, IR modulator
  • I2S (for high quality audio interface)
  • Real Time Clock (with user-added 32.768 crystal and battery)
  • 16 general purpose DMA channels (separate from USB)
  • Touch Sensor Inputs

You can refer to the Teensy Schematics here !

Specification

Dimensions 18mm x 37mm x 4mm

Related