OctoWS2811 Adapter for Teensy 3.1 - Control tons of NeoPixels!

Product ID: 1831
Octows2811 adapter for teensy 3 dot 1 cont 5765897239
  • Octows2811 adapter for teensy 3 dot 1 cont 5765897239
  • Octows2811 adapter for teensy 3 dot 1 cont 6053525272
  • Octows2811 adapter for teensy 3 dot 1 cont 7631534144
$22.99 Backordered

Ships in 7 to 10 working days

This adapter board connects the Teensy 3.1 to up to thousands of WS2811/WS2812 (a.k.a NeoPixel) and compatible LEDs using the OctoWS2811 Library.

It features a 74HCT245 buffer chip and 100 ohm series matching resistors. A CAT6 Ethernet cable is used to connect this board to the LED strips. A CAT6 cable is designed for very high bandwidth, minimal cross-talk between twisted pairs, and 100 ohm impedance, for a very high quality signal.

Teensy 3.1 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.1 brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming directly in C language.

This product does NOT include a Teensy, it's just the adapter!

  • Four self-threading screws
  • Eight LED outputs
  • Dimensions:
  • 56mm x 34mm x 2mm / 2.2" x 1.3" x .08"
  • Height with Ethernet Outlets: 15mm / 0.6"
  • Weight: 11.1g

Teensy 3.1 OctoWS2811 Adaptor


Related