Mikroe mikromedia 5 for Tiva

Product ID: 8140
Mikroe mikromedia 5 for tiva 7365728070
$323.99 Backordered

Ships in 15 to 20 days

Main features

Powerful Workhorse

chip.png

Mighty TM4C129xNCZAD rocks: 120 MHz operation, 1 MB of Flash, 256 KB of SRAM, µDMA controller, on-chip LCD controller and a lot more.

5” Touch Screen

scale.png

The Huge touchscreen in 800x480px resolution brings awesome graphics and vivid colors. You’ve never seen such a big display driven just by a microcontroller.

CC3100 WiFi module

wifi.png

Internet of things - check! Insanely popular CC3100 WiFi module is right here for you. It features easy to use SimpleLink IPv4 TCP/IP stack.

Debugger on board

puzzl.png

For the first time, we’re embedding programmer and debugger on mikromedia board. Just plug in the USB cable and there you go!

What’s on Board

Click on the desired thumbnail to view full image.

cercle_rouge.png
tft.png

5” Touch Screen

800x480px Color TFT Display with Touch Panel can display vivid and clear color images or advanced graphic content.

uart_leds.png

Debugging LEDs

Two LEDs are provided to indicate debugging/programming activities.

pwr_led.png

Power LED

We have added power indicator LED, so you can be sure whether your board has stable power supply.

battery_led.png

Battery Indicator LED

Whenever your board charges the battery, this LED will glow in red. When it’s fully charged it will change to green. Handy, isn’t it?

connection_pads.png

Connection pads

Every unsused microcontroller pin is available through connection pads. They can be used to connect your mikromedia board with additional shields or accessory boards.

temp_sensor.png

Temperature Sensor

Analog Temp. Sensor MCP9700A is used to measure temperature from -40ºC to 125ºC.

screw_holes.png

Mounting Holes

Four mounting holes, one in each corner of the board, facilitate board integration.

ir_receiver.png

Infrared Receiver

IR receiver diode enables you to remotely control your device.

rgb_led.png

IRGB LED

Front side features RGB LED which is useful for simple visual signalization.

ethernet_leds.png

Ethernet Indicator LEDs

Two LEDs (Link and Ackowledge) are provided for monitoring ethernet communication.

reset_button.png

Ethernet Indicator LEDs

Two LEDs (Link and Ackowledge) are provided for monitoring ethernet communication.

photosensor.png

Photosensor

PIN photosensor enables you to measure ambient light and respond by dimming or brightening up the screen backlight.

mcu.png

TM4C129xNCZAD

High-performance Tiva™ C Series ARM® Cortex™-M4F microcontoller with on-chip FPU and DSP easily handles demanding applications.

rf_antenna.png

Active RF chip antenna

Active RF chip antenna for 2.4 GHz RF transceiver.

dc_connector.png

DC connector

You can easily provide necessary power supply using this standard DC connector.

battery_connector.png

Battery connector

Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.

nordic_rf.png

RF Transceiver

Nordic nRF24L01+ is a wireless ultra low power 2.4 GHz RF transceiver. It has a simple SPI interface.

wifi_antenna.png

Active WiFi Chip Antenna

Active 2.4GHz Chip antenna is specially tuned for CC3100 WiFi module. It ensures that you have the best wireless coverage.

wifi.png

CC3100 WiFi Module

This popular wireless network processor supports had the best-in-class performance. It implements 802.11 b/g/n standards, and features embedded IPv4 TCP/IP stack, thus taking the load off the MCU.

microsd_slot.png

microSD card slot

microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SPI communication.

debug_usb_connector.png

In-Circuit Debug Interface

Integrated In-Circuit Debug Interface (ICDI) enables programming and debugging right here on board. No additional hardware required.

usb_connector.png

miniUSB connector

Microcontroler supports Full Speed and USB 2.0 OTG, so this connector allows you to communicate with a PC or other USB devices using USB connection.

jtag_emulator.png

JTAG emulator

On-board FT2232D chip provides debugging interface, serving as a JTAG emulator.

accelerometer.png

Accelerometer

On-board ADXL345 Digital Accelerometer allows you to measure acceleration.

sdram.png

SDRAM MT48LC4M16A2

MT48LC4M16A2 - 8MB SDRAM is not just a convenience, it’s a necessity. Use it to store images and resources for the large TFT touchscreen, and you’ll experience five times performance boost.

battery_charger.png

Battery Charger circuit

TPS2041B Battery Charger circuit enables you to charge your Li-Polymer battery directly from USB port.

mcu_crystal.png

Crystal Oscillator

25MHz crystal oscillator circuit that provides external clock is connected to microcontroller osc pins.

rtc_crystal.png

RTCC Crystal Oscillator

Board contains 32.768kHz Crystal oscillator (X1) which provides external clock for internal RTCC module.

rtc_battery.png

RTC battery

Lithium polymer battery is providided for retaining data and powering internal Real-Time Clock module of the microcontroller.

piezo_buzzer.png

Piezo Buzzer

With piezo buzzer you can debug your applications, or have audio signalization feature. It can be connected to two digital output pins, one of which is the output of PWM module.

tft_connector.png

Touch Screen Connector

Connector for the Touchscreen flat cable is located at the back of the board.

ethernet_coil.png

LAN Filter

10/100/1000M LAN pulse transformer and filter.

mp3_codec.png

Stereo Audio codec

VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files.

on_off_switch.png

ON/OFF Switch

Two position ON/OFF switch is a handy feature. It’s conveniently located right on the edge of the board.

audio_jack.png

Audio connector

Quadrupole audio connector enable you to connect headphones with microphone to the audio codec chip and use it in your applications.

debug_connector.png

Audio connector

Quadrupole audio connector enable you to connect headphones with microphone to the audio codec chip and use it in your applications.

ethernet_connector.png

RJ-45 Ethernet connector

High quality female socket for standard Ethernet cables with RJ-45 connector.

Why choose mikromedia

Programming

programming.png

The board features mikroProg for Tiva™ programmer and debugger. All you need to do is plug the USB cable into ICDI connector and use mikroProg Suite for ARM or other programming software to upload new device firmware.

Compilers

3d-printing-software.png

mikromedia 5 for Tiva is fully supported by mikroC, mikroBasic, mikrobasic and mikroPascal compilers for ARM. Compilers come with dozens of examples that demonstrate every feature of the board.

GUI design with Visual TFT

analytics.png

Easily create fantastic colorful graphical user interfaces (GUI) for mikromedia in VisualTFT software. Even total beginners will be able to create amazing mikromedia applications.

mikromedia_5_tiva_hand.png

Modules

Click on the desired thumbnail to view full image.

Graphics Controller

mikromedia5_TIVA_controller_small.png

High-performance Tiva™ C Series ARM® Cortex™-M4F microcontoller with on-chip FPU and DSP easily handles demanding applications.

4 Audio connector and codec

mikromedia5_TIVA_audio_small.png

VS1053 MPEG audio decoder with SPI interface for fast reproduction of Ogg Vorbis / MP3 / AAC / WMA / FLAC / MIDI audio files, 3.5mm four pole audio jack allows you to directly connect your headset to mirkomedia and develop various audio applications

microSD card slot

mikromedia5_TIVA_mmc_small.png

microSD Card slot allows you to store large ammounts of data externally on microSD card using fast SDIO communication.

Wireless connectivity

mikromedia5_TIVA_wireless_small.png

Mikromedia plus for STM32 is equipped with the Rufa 2.4GHz antenna, from antenova(r). It allows easy development of applications that use wireless communication.

miniUSB connector

mikromedia5_TIVA_usb_small.png

Microcontroler supports Full Speed and USB 2.0 OTG, so this connector allows you to communicate with a PC or other USB devices using USB connection.

Battery connector

mikromedia5_TIVA_battery_small.png

Li-Polymer battery connector allows you easier connection with your battery. Autonomous power supply will give your mikromedia the wings it deserves.

What’s in the Package

All images shown are for illustration purpose only. Actual board may vary due to product enhancement.