2.8" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket

Product ID: 473
2 dot 8in tft lcd with cap touch breakout board number 1
  • 2 dot 8in tft lcd with cap touch breakout board number 1
  • 2 dot 8in tft lcd with cap touch breakout board number 3
  • 2 dot 8in tft lcd with cap touch breakout board number 2
  • 2 dot 8in tft lcd with cap touch breakout board number 4
$77.99 Out of Stock

Out of Stock

No worries, we can notify you when this item is back in stock. Please enter your email.

You will be notified about this product only!

Add some jazz & pizazz to your project with a color capactive touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display. As a bonus, this display has a capacitive single-touch touchscreen attached to it already, so you can detect finger presses anywhere on the screen. (We also have a resistive touchscreen version of this display breakout)

This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you'll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 2 I2C pins are required for the touch screen controller. This display is wrapped up into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use with any microcontroller. If you're going with SPI mode, you can also take advantage of the onboard MicroSD card socket to display images. (The microSD card not included, but any will work) into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use with any microcontroller. If you're going with SPI mode, you can also take advantage of the onboard MicroSD card socket to display images. (The microSD card not included, but any will work)

Specification

Dimensions Board 51mm x 81mm x 2mm / 2" x 3.2" x 0.08"
Dimensions Screen 50mm x 69mm x 4mm / 2" x 2.7" x 0.2"
DimensionsMounting Holes 54mm x 74mm / 2.1" x 2.9"
Weight 44g

Related