MG995 - Standard Metal Gear Servo Motor

SKU: TH0648
$7.50 Out of Stock
Ships Today - If you order within hrs mins!

  • Rotation


Quality
First

Awesome
Support

Secure
Checkout

Worldwide
Shipping

The MG995 Servo Motor is an all metal gear servo motor weighing 55g and operating on a wide voltage range of 3.0V to 7.2V DC and giving 13 kg/cm of torque.


Out of Stock!

We will email you when this item is back in stock. Please enter your email

Overview

The MG995 Servo Motor is an all metal gear servo motor operating on a wide voltage range of 4.8V to 6.6V DC, it offers exceptional torque of 11 kg/cm, ensuring performance in various applications. Its swift reaction speed (no load speed of 0.20 seconds / 60 degrees at 4.8V and 0.16 seconds / 60 degrees at 6.0V. make it a preferred choice for many applications like Robots, Robotic Arms, RC plane, RC car etc.

Dimensions

A B C D E F
42.7 40.9 37 20 54 26.8
Unit: Milimetre (mm)

Specifications

Voltage 4.8V to 6.6V DC
Torque 9.4 kg/cm at 4.8V
11 kg/cm at 6.0V
Speed 0.20 seconds / 60 degrees at 4.8V
0.16 seconds / 60 degrees at 6.0V
Current 10 mA (Idle Current)
170 mA (No Load Current)
1200 mA (Stall Current)
Gear Type Metal
Cable Length 30 cm
Plug / Connector JR FUTABA Universal
Operating Temperature 0°C to 55°C
Weight 55g

Pinout

Servo motor pinout and wire color coding.

No. Pins Color
1 Signal   Yellow
2 VCC   Red
3 GND   Brown

Connections & Code

Connection
  • Signal: Connect to pin D9
  • VCC: You may connect this to 5V pin on arduino UNO but we recommend to connect it to an external power supply between 4.8V to 6.6V DC.
  • GND: Connect to GND. Make sure you connect all ground pins together. If you are using an external power supply connect the power supply ground to aduino UNO GND.

Code

Before we move into coding, first we need to install the Servo library written by Michael Margolis, Arduino in the Arduino IDE. 

You can install this library by directly going to Tools > Manage Libraries which opens the Library Manager. In the library manager search for Servo using the search bar and click on the install button to install the latest version of the Servo library.

/* Sweep*/

#include <Servo.h>
Servo myservo; // create servo object to control a servo // twelve servo objects can be created on most boards int pos = 0; // variable to store the servo position void setup() { myservo.attach(9); // attaches the servo on pin 9 to the servo object } void loop() { for (pos = 0; pos <= 180; pos += 1) { // goes from 0 degrees to 180 degrees // in steps of 1 degree myservo.write(pos); // tell servo to go to position in variable 'pos' delay(15); // waits 15 ms for the servo to reach the position } for (pos = 180; pos >= 0; pos -= 1) { // goes from 180 degrees to 0 degrees myservo.write(pos); // tell servo to go to position in variable 'pos' delay(15); // waits 15 ms for the servo to reach the position } }

Opps

Sorry, it looks like some products are not available in selected quantity.

OK